Pliers

with semicircular profile, used for reliable pressing of sleeves on cable ends according to DIN 46228; 8 extra deep conical press troughs; pressing will take place in the selected profiles in one work operation.

for cavity processing, with or without insulating collar according to DIN 46228

For red / blue / yellow insulated cable lugs, pin cable lugs, flat sockets and housings, round connectors and housings, impact and parallel connectors

For non-insulated flat sockets and flat housings for DIN plug-in widths F2.8; F4.8; F6.3; F9,5

For non-insulated cable lugs and pipe cable lugs with closed flange sleeve

For cavities with or without insulating collar according to DIN 46228

For stripping wires with 0.5 to 6 mm. Additionally, the cables can be cut. Use with hollow pliers no. 6638, 6639, 6640 and 6641.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 D, jaw bending angle 90 °, reinforced design, forged, precisely machined ends.

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

DIN 5256 B, jaw bending angle 90 °, reinforced design, forged, precisely machined ends, with return spring (abrasion-resistant compression springs).

for securing screws, with additional cutting edge, with bevelled jaws, with 40 ° bevel, for wires up to 1.6 mm in diameter (dec.in. 0.06), with direction of rotation to the right and to the left , with automatic return; chrome-vanadium steel.