Special tools for engines and gearboxes

for screws with internal TORX®, size T27, square hole for 1/4 "drive; used for tightening switches of automatic transmissions 3HP 22, 4HP 22.

Wingspan 20-27 mm, which is used for the bearing wheel of the guide wheel on the drive wheel of the oil pump with support No. 11061-2.

for removing and fitting the output shaft circlips, as well as the economical operation of the gearboxes (all GETRAG gear units, and ZF-gearboxes S4-18 / 3).

bent, pin spacing 18 mm, pin diameter 2.9 mm, length 140 mm; application: for tensioner pulley of diesel engine drive belt size 1.6l.

square hole for 3/8 "drive,
used together with torque wrench No. 730/2 SERVICE-MANOSCOP®.

clearance range 16-20 mm, for sealing rings and deep groove ball bearings of crankshafts; use together with counter support No. 11061-1.

switchable; clamping square 1/2 ".

8-piece set. Contents:
1 pc centering pin of the coupling, length 220 mm
1 pc combined sliding cone / cylinder, graduated cylinder, 22.2-25.2 mm
1 pc sliding cylinder, graduated from both sides, cylinder diameter 16-21 mm
5 pcs cylindrical handle, each in two sizes, cylinder diameter 12-20 mm; all in a wooden box 255 x 81 x 38 mm.