Special tools for cars

bez odstupňování, s otočnou rukojetí, do šířky stěny 1,8 mm, taky pro trubky z nerezu; délka retězu 270 mm.

ohebný, rozměr klíče 7 mm,
pro vinuté závity, k hadicovým objímkám hadic chladící kapaliny,
maximální moment 8 N·m.

ohebný, rozměr klíče 6 mm; použití: pro objímky hadic chladící kapaliny; max. moment 8 N·m.

Vnitřní šestihran 5/16", na použití s bitovým nástavcem šroubováku č. 1435.

5-piece set in a robust plastic case.
Contents:
1 pc STANDARD-MANOSCOP® No. 721QR / 20 Quick, 40-200 N · m, switchable, with external square for 1/2 "drive
3 Sockets 51IMP K , sizes: 17 (green), 19 (blue), 20.8 (red)
1 piece extension piece, length 130 mm, No. 509QR / 5

with suction container.

with suction container.

with suction container.

Test tip made of steel, with plastic handle and hose ducts.

with interchangeable jaws, and interchangeable presser. Applicable to almost every engine of all passenger cars, especially without disassembling the cylinder head.

in a nickel-plated case, with conical plates.

in a nickel-plated case, with conical plates.

in a nickel-plated case, with conical plates.

for fitting and removing piston rings; glossy nickel-plated.

for fitting and removing piston rings; glossy nickel-plated.

for fitting and removing piston rings; glossy nickel-plated.

for fitting and removing piston rings; glossy nickel-plated.

made of a special spring belt, infinitely adjustable, with a wrench for tensioning.

made of a special spring belt, infinitely adjustable, with a wrench for tensioning.

made of a special spring belt, infinitely adjustable, with a wrench for tensioning.

for No. 11066, each with 2 pieces, hardened, nickel-plated.

for No. 11066, each with 2 pieces, hardened, nickel-plated.

for No. 11066, each with 2 pieces, hardened, nickel-plated.

for No. 11066, each with 2 pieces, hardened, nickel-plated.

for removing and fitting the output shaft circlips, as well as the economical operation of the gearboxes (all GETRAG gear units, and ZF-gearboxes S4-18 / 3).

glossy nickel-plated.

glossy nickel-plated.

for removing low-temperature valve seals, eg for four-valve engines. Joint and jaws made of blackened hardened steel sheet, handle made of shaped sheet steel, nickel-plated design.

for removing the valve seals, for removing the valve springs on VW-Audi- for models with an upper steering shaft, such as Golf, Passat, Audi 80, Audi 100, BMW and Mercedes-Benz; glossy nickel-plated.

228 tools in TCS inserts, ;
in inserts 1x1 / 3, 1x2 / 3 and 5x3 / 3 for 6 drawers (No. 91P for 3 drawers).

11-piece for VW / Audi, Seat, Skoda, Porsche.
Contents:
No. 1501, 1502: pusher tool for contact diameter dimensions
1.5 and 3.5 mm
No. 1511, 1512: disassembly sleeve for diameter contacts < br /> 1.5 and 3.5 mm
No. 1553, 1557, 1558, 1591: cable release devices for dimensions 2.8; 4.8 and 5.8 mm
No. 1556: cable release for Micro-Timer II - III contacts. 1.6 mm
No. 1556-1: cable unlocking of flat plug housings with asymmetrically placed two 0.64 mm unlocking channels
No. 1574: cable unlocking for Micro-Timer contacts 1.6 mm
Content:
No 1501, 1502: Original tools for contacting 1.5 and 3.5 mm
No 1511, 1512: Disassembly f & # 252; r Contact & # 223; e 1.5 and 3.5 mm
No 1553, 1557, 1558, 1591: Input tools f & # 252; r Contact & & # 223; e
2.8; 4.8 and 5.8 mm
No 1556: Entry tool for Micro-Timer II-, III-contacts
1.6 mm
No 1556-1: Entry tool for & # 252; r Micro-Timer II-, III-contacts 252; r Flachsteckh & # 252; lsen mit asymmetrisch angeordneten Rastzungen am Kontakt in Steckern mit
2 Entriegelungskan & # 228; len 0,64 mm
No 1574: Entriegelungswerkzeug f & # 252; r Micro-Timer I-Kontakte 1.6 mm

diameter 20 mm, length 200 mm, use: for removing and inserting bearing housings and rings, etc. also for mounting the central steering knuckle.