Special tools for cars

bent, external square wrench size 8 and 10 mm, for oil pan drain plugs, gearbox, differential.

with adjustable steel strap for oil filters and round screws with a diameter of 80 to 110 mm, thanks to the steel straps it is extremely slip resistant.

with adjustable steel strap for oil filters and round screws with a diameter of 80 to 110 mm, thanks to the steel straps it is extremely slip resistant.

308 tools in TCS inserts ;
inserts 6x1 / 3, 2x2 / 3 and 7x3 / 3 for 11 drawers (No. 91P for 6 drawers).

for oil filters and similar screws up to 180 mm in diameter, anti-slip rubber strip, 22 mm wide.

279 tools in TCS inserts ;
inserts 5x1 / 3, 5x2 / 3 and 3x3 / 3 for 8 drawers (No. 91P for 4 drawers).

for oil filters and similar screws up to 180 mm in diameter, anti-slip rubber strip, 22 mm wide.

to remove and install the oil filter house cover, when replacing the oil filter insert.

to remove and install the oil filter house cover, when replacing the oil filter insert.

for oil filters, wrench size 74 mm, 14-angle, with external hexagon wrench size 22 mm and bore diameter 10 mm, for its small height 44 mm it is preferably used in hard-to-reach places.

for oil filters, wrench size 74 mm, 14-angle, with external hexagon wrench size 22 mm and with bore diameter 10 mm.

Used to release car oil filters.

bent, pin spacing 18 mm, pin diameter 2.9 mm, length 140 mm; application: for tensioner pulley of diesel engine drive belt size 1.6l.

square hole for 3/8 "drive,
used together with torque wrench No. 730/2 SERVICE-MANOSCOP®.

clearance range 16-20 mm, for sealing rings and deep groove ball bearings of crankshafts; use together with counter support No. 11061-1.

3/8 "square drive, extra long, with rubber insert, for deep-laid, hard-to-reach, spark plugs with M12 x 1.25 mm thread. For cars
Citroën: with C5 2 engine, 0 l HPI;
Peugeot: with 406 HPI engine;
Renault: Twingo, Clio, Kangoo with 1.2 l engine, 16V.

clamping hole 3/8 ", with rubber insert.

switchable; clamping square 1/2 ".

8-piece set. Contents:
1 pc centering pin of the coupling, length 220 mm
1 pc combined sliding cone / cylinder, graduated cylinder, 22.2-25.2 mm
1 pc sliding cylinder, graduated from both sides, cylinder diameter 16-21 mm
5 pcs cylindrical handle, each in two sizes, cylinder diameter 12-20 mm; all in a wooden box 255 x 81 x 38 mm.

for hexagon socket screws,
in a steel box, for general
maintenance work.
Contents:
12 pcs INHEX-handle No. 54,
key size 4, 5, 6, 7, 8, 10, 12,
14, 17, 19 mm,
No. 3054/8, No. 1054/10, with internal
square hole for 1/2 "drive.

32-piece set in a steel box, for general maintenance work.
Contents:
1 pc SERVICE-MANOSCOP® No. 30/40, 80-400 N · m
1 pc plug-in ratchet No. 735/20, switchable, with external square for drive 1 / 2 "
1 pc. Square plug-in tool no. 734/20, with external square for drive 1/2"
7 pcs. 19, 22, 27, 30 mm
1 pc No. 3731/40 spanner size 24 mm
7 pcs ring spanner handle No. 732/40, spanner size 13, 15, 17, 19, 22, 24, 27 mm
10 pcs. Handle with double hexagon no. 50, key size 13, 14, 15, 17, 19, 22, 24, 27, 30, 32 mm
4 pcs. Tools with square hole for drive 1/2 "
1 pc cross handle no. 506
1 pc extension piece, length 255 mm, no. 509/10
1 pc extension piece, length 130 mm, no. 509/5
1 extension piece, length 55 mm, No. 509/2.

4-20 N · m, external square for 3/8 "drive; application: expansion of plug-in connections of compressed air equipment for Mercedes-Benz light trucks-trucks.

Wrench size 24 mm.

Wrench size 19 mm, for expanding the plug-in connections of the compressed air system of Mercedes-Benz light trucks.

Wrench size 30 mm, square hole for 1/2 "drive; use: retracting or tightening hydraulic lines.

made of a special spring belt, infinitely adjustable, with a wrench for tensioning.

215 tools in TCS inserts ,
inserts 2x1 / 3, 2x2 / 3 and 5x3 / 3 up to 7 drawers (no. 91P to 3.5 outlets).

4 pins, length 72 mm, square hole for 1/2 "drive; use: when assembling and disassembling the fixing nuts of the nozzle holders, or for tightening them.

for setting the electronic control of the diesel engine for 440-PS engines.

285 tools in TSC inserts ,
inserts 7x1 / 3, 1x2 / 3 and 4x3 / 3 up to 7 drawers (No. 91P to 3.5 drawers).

98 pieces of tools in TCS inserts , 7x1 / 3; 1x2 / 3 and 1x3 / 3 inserts for 4 drawers (No. 91P for 2 drawers), for work table No. 92KM G, for workshop trolley No. 91B, 91P, 97N, 97N / KM, for tool box No. 94N , 94N / KM, for cassette box for tool No. 920 and for drawer workshop trolley No. 922N.

Contains 99 tools in a plastic case , cases for 4 drawers are suitable (91P cases for 2 drawers are suitable) for work table no. 92KM G, for workshop trolley No. 91B, 91P, 97N, 97N / KM, 97H / 8, 97H / KM; for tool cases No. 94N, 94N / KM; for cassette boxes No. 920 and Rollboxes 922N.